INTERRA TOUCHPANEL is an electronic device used in building automation systems.
||ARM® Cortex™-A7 Dual-Core 2 x 1.2 GHz (A20)
||Min 1 GB DDR3
||Min 8 GB with EMMC (sandisk) disc technology
||HD H.264 2160p video decoding
H.264 High Profile [email protected] or [email protected]
||Integrated HI-FI 100dB Audio Codec
2x15Watts speaker amplifier
Analogue Microphone with Noise Cancellation
I2S Digital Microphone connector
2 x 3W Speaker
||Certificated by KNX.org
||Android 4.2.2 / Linux (Debian / Ubuntu / Fedora /
||-20 ºC +70 ºC
||2x USB-HOST with USB2.0 spec, 1xUSB-OTG
||3Gbps SATA connection with SATA POWER
||100Mbps Ethernet and USB WIFI
||HDMI 1.3 up to [email protected]
10.1” IPS LCD with 1280x800 resolution @32bit
7” IPS LCD with 1024x600 resolution @ 32bits
||10.1” 5point capacitive anti-print finger,
7” 5point capacitive anti-print finger,
||Only two buttons is enough to operate: Reset And
||System includes RTC with CR1220 battery
||3pcs Relayed Output (5A), 3pcs Input with WAGO
8pcs general purpose IO with VCC and GND
||Standard SD-TF card connector up to 64Gbyte
||260 x 166 x 36 ( mm) (WxHxD)
||345 x 232 x 36 ( mm) (WxHxD)
* marked items are available on the PCBA, but not available in current case.
INTERRA TOUCHPANEL is powered by a 12V-2A DC power supply. This power supply has a special green-colored 3pin connector which is a terminal block in industrial grade. Pin indications are written on the plastic case. The middle pin is for EARTH connection and it is obsolete.
The reset button on the top cover is used to “Hard Reset” the device manually. This button has an LED indicator. If the system is powered, these LED lights on.
INTERRA TOUCHPANEL has a two pin green colored KNX connector. This connector has pin indications on the plastic box. INTERRA TOUCHPANEL has a certified KNX circuit.
For different application purposes, INTERRA TOUCHPANEL has an HDMI connector. Its output is configurable via software.
INTERRA TOUCHPANEL has a USB Host connector in the side panel. This connection extends its storage capacity to almost infinity. Also, this connector can be used for WIFI connection via USB dongle.
INTERRA TOUCHPANEL has a standard 10/100Mbps RJ45 Ethernet connector.
2x6 Pin I/O:
INTERRA TOUCHPANEL has 3inputs and 3 output connector. Both inputs and outputs are optocoupled. Outputs are connected to 12V - 5A Panasonic relays.